How to Replace Window Blinds
Window blinds are an excellent decision for your house. However, they will not serve you forever. They are susceptible to wear and breaking. Therefore you will have to replace them regularly. If you go for cheap blinds, be sure you will have to replace them more often. The good news is that how to replace window blinds is a piece of cake. As long as you know the right procedure, it will not take much of your time.
How to Replace Window Blinds
This post will take you through a step-by-step guide of replacing your window blinds regardless of the types of blinds available. Stick to the steps below, and you will be done before you even know it.
What You Will Need
- A screwdriver
- A step ladder
- Measuring tape
You got them all? Now you are ready for the task ahead.
Step by Step Guide for Replacing Window Blinds
Measuring the width of the blinds
You should start by taking the correct width of the blinds. To do this the right way, get the measurements at the bottom, the middle, and the top. Why do you need to get three width measurements? You need them to establish the narrowest width of the blinds. It is the width you are going to use if you are mounting your curtains from the inside. Remember, if you go with shades that fit at the top or the bottom; you will have a problem installing them.
Now that you got your measurements, it is time to go shopping. Of course, you will need replacements that will last longer. Wood or faux wood blinds can give you that assurance. Vinyl blinds are cheap, but they do not last long. Another decision you will have to make about shades is their color depending on where you plan on putting them, whether it be in your bedroom, kitchen and more. Typically, the come in natural wood color; while others are white or cream. You should also remember to buy mounting hardware.
Remove the old/broken blinds
The old blinds have done their part, and it is time to retire. Look into how long your types of windows last to determine if they are old or not. Climb the step ladder to the top and examine how the shutters are hanging. You should notice the mounting hardware from the top. It is easy to slide them out one by one. The blinds will effortlessly come out. For some blinds, you will need to work on screws before you can bring them down. You have your screwdriver; thus, a few screws will not stand in your way to finishing the job.
Mounting the new blinds
Here you will be working in reverse to what you did in the step above. You decide whether the blinds will be mounted from the inside or outside. Climb the step ladder with your screwdriver at hand. You either use brackets or mounting hardware to put your type of blinds in place. Once you place in the last blind, test whether they will run up and down smoothly.
You see, it is not rocket science to learn how to replace window blinds. Get your tools, shop for what you need, and nothing will stop you from enjoying the benefits of blinds.